Mótorolía Top Tec 20L 4600 5W-30

- Vörunúmer: LM3757

56.900 kr


Mótorolía TT 20L 4600 5W-30

Optimum for modern gasoline and diesel engines with multi-valve tech nology, Valvetronic and turbo charging (with or without charge air cooling). Especially suitable where there are long intervals between oil changes and heavy duty engine requirements. Also suitable for gas-powered vehicles (CNG/LPG). Tested safe with catalytic con verters and turbo chargers.

Suitable for gasoline vehicles and for diesel vehicles with and without particulate filter. Modern motor oil for gasoline and diesel engines with and without diesel particulate filter (DPF) and exhaust gas turbocharging. The combination of unconventional basic oils using synthetic technology, together with the latest additive technology, guarantee a motor oil that provides exceptional protection against wear and reduces oil and fuel consumption, while ensuring that the engine is immediately supplied with oil. This product allows for oil change intervals of up to 40,000 km, depending on the manufacturer’s specifications. IMPORTANT: Not available for order outside Europe.

APPROVALS:

  • ACEA C3
  • API SN
  • API CF
  • BMW Longlife-04
  • GM dexos2™
  • MB-Freigabe 229.31
  • MB-Freigabe 229.51
  • MB-Freigabe 229.52
  • VW 502 00
  • VW 505 00
  • VW 505 01

LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:

  • ACEA A3
  • ACEA B4
  • Fiat 9.55535-S3
  • Ford WSS-M2C 917-A
  • Opel GM-LL-A-025
  • Opel GM-LL-B-025
StaðsetningLagerstaða?
Klettháls 5 (lager)
Bíldshöfði 10 Nei
Akureyri Nei
Hafnarfjörður Nei
Selfoss Nei

Tæknilýsing

SAE class (engine oils)
5W-30 SAE J300
Density at 15 °C
0,855 g/cm³ DIN 51757
Viscosity at 40 °C
68,9 mm²/s ASTM D 7042-04
Viscosity at 100 °C
12,0 mm²/s ASTM D 7042-04
Viscosity at -35 °C (MRV)
< 60000 mPas ASTM D4684
Viscosity at -30°C (CCS)
<= 6600 mPas ASTM D5293
Viscosity index
172 DIN ISO 2909
HTHS at 150°C
>= 3,5 mPas ASTM D5481
Evaporation loss (Noack)
10,0 % CEC-L-40-A-93
Pour point -39 °C
DIN ISO 3016
Flash point 230 °C
DIN ISO 2592
Total base number
7,4 mg KOH/g DIN ISO 3771
Sulfate ash
<= 0,8 g/100g DIN 51575
Color number (ASTM)
2,5 DIN ISO 2049
Stilling hf.